electrostatic precipitator parts

Know More About Electrostatic Precipitators And Its Control Techniques

The easiest way to remove particles from a gas stream is by using an electrostatic precipitator. Electrical energy is used to charge those particles negatively or positively before they get attracted by the collector plates which are generally of the opposite charge. The collected particles become dry in the collector plates and can be easily removed or washed with water. Not everyone using the procedure is aware of the fact that the collection efficiency of ESPs is more than 99 percent and this is why they are widely used in various industries.

Its Various Components

The four common components you will generally find in an electrical precipitator are discharge electrodes, rappers, collection surfaces and gas distribution plates. These plates comprise of numerous plates which are perforated to maintain and properly distribute the air entering the gas stream.

The discharge electrodes in a majority of the ESPs are divided into 3 or 4 fields. The larger electrodes are divided into around 14 fields which are generally found in series. A solo transformer-rectified set power supply is sufficient to energise those electrodes and create ions. The ions dashes with the particles in the incoming gas stream and applies an electrical charge. The charged particulate matter then collects on the plates or pipes which can be later removed using the rapping system.

Types Of Electrostatic Precipitators

There are generally two types of ESPs, namely dry ESPs and wet ESPs. What differentiates these two is the method through which the plates where the particles collect are cleaned. Vibrations or mechanical impulses are used to loosen the collected particulate matter and clean the dry ESPs from the collection plate. To remove wet ESPs, you have to rinse the collector plate thoroughly using water. Using this wet method becomes necessary when the particles accumulated in the gas streams are sticky and have low resistivity.

ESP Performance And Particle Resistance

For someone not aware of the term, ‘particle resistivity’ is basically the property of the particles that can influence the process through which they deposit or is removed from the collection plates. This is why resistivity of the particles can affect the performance of Electrostatic Precipitators drastically. Moderate resistivity is regarded to be the ideal situation when the particles can automatically accomplish some of their charges after reaching the collection plate. This prevents the inhibition of other deposited particles and makes them capable of retaining their charge while holding them lightly on the plate.

It takes longer for the particles to conduct away their charge if the resistivity of the particles is higher. As a result, a negative charge builds up on the plate which inhibits the other deposits. If the resistivity is too low, the particles will start losing their own charge once they reach the collection plate and start attracting charges from the plate. This will make the negatively charged particles deter back into the gas stream.

Since your knowledge about electrostatic precipitators has enhanced, it’s time you start looking for a reliable company who can take care of all your ESPs needs.


Electrostatic Precipitator, Its applications, Advantages, at Industrial Zones in India

According to world Health Organisation 2015 report, around 7 million premature deaths take place due to air pollution.

And 10 thousand people are dying at the age of around 40 because of toxic fumes. Thousands of children become asthma patients at the age of six only.

And according to a forecast according to the Constance growth of dying, by the year of 2050, there must be a scarcity of pure drinking water due to the lack of sanitation.

The most air polluted “hotspots” have been found in the biggest metropolitan cities, rather can say, the industrial areas of the most metropolitan cities in this country.

According to another statistical report air has been polluted due to cheap and poor quality supply of coal in most industrial areas. And this leads to India being  one of the leading pollutant regions in the whole universe.

The Big Smoking Zone of the Country:


Industrial areas are the backbone of every country. So, before thinking  to stop industrialization, that is the most common thinking of masses, think pragmatic to reduce pollution without getting hazard the industry and their prosperity.

Lack of exposure to sunlight children get affected in rickety or various bone deficiency diseases as the smog in air of these areas block sunlight. A permanent smoke haze has already enveloped some areas of Delhi, Patna, Gwalior and Raipur.

According to the “smoke control laws in India” apart from banning tobacco smoking in public zone or creating an extra smoking zone in railway stations or airports, it is mandatory to install Electrostatic Precipitator in every industrial zone of this country.

A little talk about Electrostatic Precipitator.


It has been used from 1900 and was first initiated by Dr. Frederick G. Cottrell in 1907. Now it is widely acclaimed by every industrial and commercial areas in India as the most proficient machinery that purifies air.

Application of Electrostatic Precipitator:

Apart from the various advantages, this apparatus works in the most proficient way to reduce toxic levels of the environment. It has potential to take away 99.9% of dust particles that is very beneficial for the welfare of eliminating health hazards.


Advantages of Electrostatic Precipitators

  • Manages massive gas level and dust, especially smog with less pressure
  • Can easily systematize mordant and wet equipment
  • Low expenses
  • It can last for several years
  • Hassle-free upholding
  • Collection efficacies even for tiny elements

Key Components of Electrostatic Precipitator Include

  • Release electrodes
  • Precipitator control
  • Wash out air systems
  • High voltage power supply
  • Spray washing systems

Layout of Electrostatic Precipitator

The preliminary cost of this equipment is quite expensive, when you purchase it for the first time. But, the best part is, its maintenance cost is very cheap and reasonable. The classification is recognized for its permanence and will surely last for several years. One of the best things about ESP is that you don’t need to purchase substitute filters. On the other hand, the ion charged plates has to be cleaned from time to time automatically for optimal performance. Electrostatic precipitator provides almost no wind resistance and doesn’t require any form of pushing control unlike other models.


In conclusion, what need to talk about, after giving the detail aspects of this must need equipment is, it is the most fundamental job to install it in all industrial zone. And we need to know its reimbursement in a vast level.